NX3L1T53GD,125
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFDFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.65V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NX3L1T53G |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-N8 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.3V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 40ns, 20ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Height Seated (Max) | 0.5mm |
| Length | 3mm |
NX3L1T53GD,125 Overview
Shipping overseas is convenient with the electronic component packed in 8-XFDFN. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, you'll find this switch device. There is 2:1 ratio between the number of multiplexers and demultiplexers. Operational temperature extended around -40°C~125°C TA. In total, there are 8 terminations. A high-quality output is provided by the electrical component's 1 channels. Powered by a 1.65V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 8 series. The analog switch ics are built using SPDT switching circuits. Circuits number 1 make up this analogue multiplexer. Search with NX3L1T53G if you are looking for analog multiplexer variants. This switch device is a typical Multiplexer or Switches. Analogue multiplexers require a 1.4V~4.3V voltage to drain from a single voltage supply.
NX3L1T53GD,125 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 60MHz
NX3L1T53GD,125 Applications
There are a lot of NXP USA Inc. NX3L1T53GD,125 Analog Switches & Multiplexers ICs applications.
- Microprocessor Controlled Analog Systems
- PBXs
- Residential Gateways, Home Gateway/Router
- Audio and video routing
- Industrial
- Medical
- Microprocessor controlled systems
- New designs requiring multiplexer functions
- Cable PC
- Intelligent PBX