NX3L1T5157GM,132
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Number of Circuits | 1 |
| -3db Bandwidth | 60MHz |
| On-State Resistance (Max) | 750mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 90 dB |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 35pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 40ns, 20ns |
| Charge Injection | 15pC |
| Channel-to-Channel Matching (ΔRon) | 20m Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 1.4V~4.3V |
| Height Seated (Max) | 0.5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 7 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFDFN |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NX3L1T5157 |
| Pin Count | 6 |
| JESD-30 Code | R-PDSO-N6 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 4.3V |
NX3L1T5157GM,132 Overview
Shipping overseas is convenient with the electronic component packed in 6-XFDFN. High reliability is achieved by using advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~125°C TA. The total number of terminations is 6. A 1 channel electronic part produces high-quality output. An 1.5V voltage supply should allow the electrical part to be turned on and run. As part of the design of the 6 series, this electronic part has been incorporated into the system. The analog switch ics are built using SPDT switching circuits. Circuits number 1 make up this analogue multiplexer. Use NX3L1T5157 to search for variants of the digital switches. The analogue multiplexer in this example is a typical Multiplexer or Switches. This analog switch requires a voltage of 1.4V~4.3V to drain from a single voltage supply.
NX3L1T5157GM,132 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 60MHz
NX3L1T5157GM,132 Applications
There are a lot of NXP USA Inc. NX3L1T5157GM,132 Analog Switches & Multiplexers ICs applications.
- High reliability control systems
- High-Voltage
- Digital access cross connects
- Residential Gateways, Home Gateway/Router
- DSUs
- Medical
- Battery Powered Systems
- Isolation
- PBX interfaces
- Avionics and Military Systems