NLAS1053USG
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Resistance | 70Ohm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 250mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NLAS1053 |
| Pin Count | 8 |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1μA |
| Power Dissipation | 250mW |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 12 ns |
| Number of Inputs | 2 |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 12 ns |
| -3db Bandwidth | 200MHz |
| On-State Resistance (Max) | 16Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 93 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF 10pF |
| On-state Resistance Match-Nom | 3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 8ns, 8ns |
| Charge Injection | 3pC |
| Channel-to-Channel Matching (ΔRon) | 2 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 2V~5.5V |
| Signal Current-Max | 0.05A |
| Height | 800μm |
| Length | 2.4mm |
| Width | 2.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NLAS1053USG Overview
Presented in 8-VFSOP (0.091, 2.30mm Width), this electrical component is convenient for overseas shipping. The advanced packaging method Tape & Reel (TR) provides high reliability. In Surface Mount, this analog switch is mounted. There is 2:1 ratio between the number of multiplexers and demultiplexers. An extended operating temperature of -55°C~125°C TA degrees Celsius. 8 terminations have been made so far. By its 2 channels, the electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 4.5V voltage supply. It is injected into the electrical part body with 8 pins. SPDT switching circuits are used in these analog switch ics. There are 1 circuits in this switch device. Look for analog switch ic variants by searching with NLAS1053. The internal resistance of this digital multiplexer is 70Ohm. For details about the functions of 8 pins, please refer to the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. Users should never supply a voltage higher than 5.5V to a switch device. Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2V. This digital switch can be operated with a current of 1μA. A voltage of 2V~5.5V is required for this switch device, which drains from a single voltage source. It is possible to operate 2 inputs. A 170MHz-bandwidth can be used for data transfer.
NLAS1053USG Features
2 Channels
Switch Circuit: SPDT
1μA Supply Current
-3db Bandwidth: 200MHz
Bandwidth: 170MHz
NLAS1053USG Applications
There are a lot of ON Semiconductor NLAS1053USG Analog Switches & Multiplexers ICs applications.
- RGB switches
- Cable PC
- Audio and video switching
- Digital Cross-Connects
- Audio/video switches
- PBXs
- Residential Gateways, Home Gateway/Router
- Voice over IP/DSL – Integrated Access Devices, Smart
- Communications systems
- Sample hold systems