NCV7608DWR2G
| Parameters | |
|---|---|
| Factory Lead Time | 17 Weeks |
| Lifecycle Status | ACTIVE, NOT REC (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Resistance | 1.2Ohm |
| Applications | DC Motors, Lamps, Relays |
| Subcategory | Peripheral Drivers |
| Technology | Power MOSFET |
| Voltage - Supply | 3.15V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Base Part Number | NCV7608 |
| Pin Count | 28 |
| Number of Outputs | 8 |
| Output Voltage | 48V |
| Max Output Current | 250mA |
| Power Supplies | 3.5/5V |
| Interface | SPI |
| Output Configuration | Half Bridge (4) |
| Output Current | 350mA |
| Rise Time | 12μs |
| Fall Time (Typ) | 12 μs |
| Voltage - Load | 5.5V~28V |
| Driver Number of Bits | 8 |
| Fault Protection | Current Limiting, Open Load Detect, Over Temperature, Over Voltage, UVLO |
| Rds On (Typ) | 1.2 Ω |
| Built-in Protections | OVER CURRENT; THERMAL |
| Load Type | Inductive, Capacitive, Resistive |
| Height Seated (Max) | 2.65mm |
| Length | 17.925mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCV7608DWR2G Overview
For packaging, Tape & Reel (TR) is used.A cost-saving measure is taken to include H bridge in the 28-SOIC (0.295, 7.50mm Width) package.Bridge driver is possible to ensure improved reliabilbridge drivery by varying the supply voltage of 3.15V~5.25V.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge is possible for -40°C~150°C TJ to operate normally at motor driver H bridges operating temperature.Among H bridge motor drivers many applications are DC Motors, Lamps, Relays.On the PCB H gate is mounted using Surface Mount.Slew Rate Controlled, Status Flag is another of full bridges specific characteristics.28 terminations are used to terminate transmission lines with H bridges that match their characteristic impedance.A signal interface uses 28 pins as pronged contacts.This H bridge ic has a base H bridge ic number of NCV7608 which allows more related H bridge ics to be identified.H bridge circuit operates on a voltage of 3.3V.This is an electronic H-bridge of the Automotive, AEC-Q100 series.When the ambient temperature reaches 250mA, the power supply will provide the maximum load current possible.The output and power supply pins are flowing wH-bridgeh current 350mA.A number of 28 pins work together to provide this bridge driver with its specific functions.There is a 8 output on it.There are many similarities between this H bridge motor driver and other components in the subcategory of Peripheral Drivers.48V represents the voltage released by the Hbridge.The electric power of 3.5/5V is supplied to the electrical load.
NCV7608DWR2G Features
Available in 28-SOIC (0.295, 7.50mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : NCV7608
NCV7608DWR2G Applications
There are a lot of ON Semiconductor NCV7608DWR2G Full Bridge Drivers, Half-Bridge Drivers applications.
- Bipolar stepper motor
- DVD players
- OA equipments
- Small Form-Factor Voltage Regulator Modules
- High-Performance Gaming Motherboards
- High-Current DC-DC Point-of-Load Converters
- Voltage Regulators for GPUs
- Non-V-Core
- Telecom Microprocessor
- High current, low profile DC-DC converters