NCP5369MNR2G
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Bootstrap Circuit, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Applications | Synchronous Buck Converters |
| Subcategory | MOSFET Drivers |
| Technology | Power MOSFET |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Frequency | 1MHz |
| Base Part Number | NCP5369 |
| Pin Count | 40 |
| Max Output Current | 35A |
| Interface | PWM |
| Nominal Supply Current | 20mA |
| Output Configuration | Half Bridge |
| Output Current | 35A |
| Max Supply Current | 20mA |
| Halogen Free | Halogen Free |
| Output Current per Channel | 35A |
| Voltage - Load | 4.5V~25V |
| Fault Protection | Over Temperature, Shoot-Through, UVLO |
| Number of Drivers | 2 |
| High Side Driver | YES |
| Current - Peak Output | 50A |
| Load Type | Inductive |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 13 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -55°C~150°C TJ |
NCP5369MNR2G Overview
H bridge is packaged using Tape & Reel (TR).In order to save costs, H bridge is included in the 40-VFQFN Exposed Pad package.Reliabilbridge drivery can be improved by increasing 4.5V~5.5V's supply voltage.In the way of Surface Mount, H bridge circuit is mounted.-55°C~150°C TJ can work normally at motor driver H bridges operating temperature.Synchronous Buck Converters is pretty useful in a variety of applications.The PCB is mounted wH gateh Surface Mount.Full bridge also has a number of specific characteristics, including Bootstrap Circuit, Status Flag.A transmission line can be terminated at a 40 termination with the H bridge whose characteristic impedance matches the transmission line.An interface using 40 pins is used to provide pronged contact.In addition to the NCP5369 H bridge ic number, more related H bridge ics can be located by using its base H bridge ic number.For the operation of the H bridge, a voltage supply of 12V is used.At a specified ambient temperature, 35A is the maximum load current that a power supply can provide.A maximum current is reached by output when H-bridge reaches 50A.Output and power supply pins have a current of 35A.It is through 40 pins that this bridge driver is able to perform its specific functions.This H bridge motor driver falls under the subcategory of MOSFET Drivers. It is similar to other parts within that category.H-bridge is possible to integrate 2 drivers into the system.
NCP5369MNR2G Features
Available in 40-VFQFN Exposed Pad Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : NCP5369
Subcategory: 50A
NCP5369MNR2G Applications
There are a lot of ON Semiconductor NCP5369MNR2G Full Bridge Drivers, Half-Bridge Drivers applications.
- Industrial Fans
- CD players
- DVD players
- Voltage Regulators
- Small Form-Factor Voltage Regulator Modules
- High-Current DC-DC Point-of-Load Converters
- Notebook Computers
- Workstations
- Home Appliances
- Networking Microprocessor Voltage Regulators