NCP1054P100G
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Output Current-Max | 2A |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
NCP1054P100G Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.Through Hole is mounted in the way of this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .In this AC DC converter, the analog IC type is SWITCHING REGULATOR .When the switching frequency reaches 100kHz , the circuit is closed.Vcc/Vdd can be used within the range of 7.5V~10V supply voltage.As a result, it has a total of 8 terminations.There are 8 pins on the ac-dc converter.It is possible to ensure a maximum value of 8.5V for the input voltage using a unique technique.A maximum current of 2A may be supplied to the ac to dc inverter.
NCP1054P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
NCP1054P100G Applications
There are a lot of Rochester Electronics, LLC NCP1054P100G AC DC Converters applications.
- Adaptors for Portable Media Player
- Dimmers
- Automotive Clusters
- Low-Voltage I/O System Power
- AC/DC Adaptors/Chargers for E-books
- Battery chargers for mobile devices with touchpad display
- Air Conditioning
- Vacuum Cleaner
- Consumer electronics
- Standby and Auxiliary Power Supplies