NC7SP19L6X
| Parameters | |
|---|---|
| Type | Decoder/Demultiplexer |
| Terminal Finish | Gold/Nickel (Au/Ni) |
| Subcategory | Decoder/Drivers |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 0.9V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7SP19 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 1:2 |
| Polarity | Non-Inverting |
| Supply Voltage-Min (Vsup) | 0.9V |
| Load Capacitance | 30pF |
| Throw Configuration | DPST |
| Propagation Delay | 48.3 ns |
| Quiescent Current | 900nA |
| Turn On Delay Time | 48.3 ns |
| Family | P |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 2.6mA 2.6mA |
| Supply Type | Single |
| Max I(ol) | 0.0005 A |
| Number of Input Lines | 1 |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Weight | 18mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 7SP |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
NC7SP19L6X Overview
This is a relatively small item of digital switch that is included in the 6-UFDFN in order to save space on the board.In this case, it is packaged as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.A temperature of -40°C~85°C will not leave the turn signal swturn signal switchch susceptible to external influences.When operated with a 0.9V~3.6V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The multiplexers can be used for a wide range of applications since they are members of 7SP series.Its basic configuration includes terminations in the 6 range.The base part number is 7SP19, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 1.2V is supplied.As a result, NO LEAD represents the end of the conductors.In this case, Single is employed as the supply type.Currently, it is configured with a 6 pin configuration.Surface Mount is the way it is mounted.Among the family of P the logic switch is a member.The minimal supply voltage (Vsup) should be kept at 0.9V to avoid some unnecessary failures.The turn signal switch has 2 outputs designed for operation.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.No external influence consumes 900nA current of multiplexer ic.A TAPE AND REEL packaging method is used in the switches.As a voltage level input, the multiplexers have 1 lines.
NC7SP19L6X Features
Supplied in the 6-UFDFN package
Adopting a supply type of Single
1 input lines
NC7SP19L6X Applications
There are a lot of ON Semiconductor NC7SP19L6X Signal Switches / Multiplexers / Decoders applications.
- A/D converters
- Make full adder
- Memory chips
- Electronically controlled engine system
- Recording transmission
- Enabling different functions units in microprocessor instruction decoding
- Code converters
- Data-routing applications
- Injectors
- Arithmetic Logic Units