N74F74D,623
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1998 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 125MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 6.2 ns |
| Family | F/FAST |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 16mA |
| Current - Output High, Low | 1mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
N74F74D,623 Overview
In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. The Tape & Reel (TR)package contains it. As configured, the output uses Differential. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is at 0°C~70°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74Fseries contain this type of chip. A frequency of 125MHzshould be the maximum output frequency. Despite external influences, it consumes 16mAof quiescent current. There have been 14 terminations. The 74F74family includes it. The D flip flop is powered by a voltage of 5V . It is a member of the F/FASTfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. There is a clock edge trigger type of Positive Edgeon this device. Due to its superior flexibility, it uses 2 circuits. For high efficiency, the supply voltage should be kept at 5V. In order to operate, the chip has 1 output lines.
N74F74D,623 Features
Tape & Reel (TR) package
74F series
14 pins
N74F74D,623 Applications
There are a lot of Nexperia USA Inc. N74F74D,623 Flip Flops applications.
- ESD protection
- Latch-up performance
- Patented noise
- Frequency Dividers
- High Performance Logic for test systems
- Instrumentation
- Single Down Count-Control Line
- Bounce elimination switch
- Differential Individual
- Functionally equivalent to the MC10/100EL29