N74F299N,602
| Parameters | |
|---|---|
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | F/FAST |
| Output Characteristics | 3-STATE |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| Power Supply Current-Max (ICC) | 90mA |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 70000000Hz |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| Series | 74F |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL |
| Technology | TTL |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74F299 |
| JESD-30 Code | R-PDIP-T20 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
N74F299N,602 Overview
20-DIP (0.300, 7.62mm) is the package in which the device is embedded. 20 is the total number of terminations on the chip. Presented in a case of Tube. Voltage rating of the part is 5V. There are 1 elements on this part. The electronic component belongs to the F/FAST. There is a component mounted in the way of Through Hole on this board. A temperature range of 0°C~70°C is used for operation. Votage within 4.5V~5.5V is supplied. Similar parts can be found using the 74F family. A 74F299 family can be used to search for similar parts. Please take note of the following additional aspects of this section: HOLD MODE; COMMON I/O PINS; TOTEMPOLE SERIAL SHIFT RIGHT & SHIFT LEFT OUTPUTS; GATED OUTPUT CONTROL. For this part, Vsup should not be less than 4.5V. Voltage can be delivered at 5V by the device. It is recommended that the maximum supply voltage for this part is not greater than 5.5V (Vsup).
N74F299N,602 Features
Mounted in Through Hole type.
Based on 74F299 family
It supplies 5V power
N74F299N,602 Applications
There are a lot of NXP USA Inc. N74F299N,602 Shift Registers applications.
- Sequence generator
- data transfer
- Pseudo Random Pattern Generator
- Parallel data
- 7-segment display control
- Interconnectors
- ROM Chips
- Output expansion
- Serial-to-parallel data conversion
- store data in digital form