MPC875CZT133
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC875 |
| JESD-30 Code | S-PBGA-B256 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 133MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (1), 10/100Mbps (2) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| USB | USB 2.0 (1) |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM, Security; SEC |
| Security Features | Cryptography |
| Height Seated (Max) | 2.54mm |
| Length | 23mm |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 12 Weeks |
| Package / Case | 256-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | 5A002.A.1 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
MPC875CZT133 Overview
Due to its 256-BBGA packaging, it is convenient to ship overseas. Advanced packaging method Tray is used to provide high reliability. The CPU has 1 Core 32-Bit cores/Bus width. The operating temperature around -40°C~100°C TA should be understood. This is a member of the MPC8xx series. A CPU with this architecture uses DRAM RAM controllers. The microprocessor features interfaces HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART for better service. 3.3V is the I/O speed of this CPU. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. Search MPC875 for variants of the embedded microprocessor. As a whole, there are 256 terminations. You should be able to turn on and run the embedded microprocessor with a voltage supply of 1.8V. There is a 32-Bit architecture in it. There is a maximum supply current of 1.9V in this microprocessor. The cpu microprocessor Microprocessors is typical. There is a wide width of 32 on the external data bus of this CPU. According to the datasheet, the embedded microprocessor requires 1.83.3V power supply.
MPC875CZT133 Features
32-Bit Structure
MPC875CZT133 Applications
There are a lot of NXP USA Inc. MPC875CZT133 Microprocessor applications.
- Fire alarms
- Christmas lights
- Computed Tomography (CT scan)
- Measurement and control field
- DCS control intelligent sensor
- Mice
- Calculators
- Scanners
- Dishwashers
- Blenders