MPC866PCZP100A
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Package / Case | 357-BBGA |
| Surface Mount | YES |
| Operating Temperature | -40°C~100°C TA |
| Packaging | Tray |
| Published | 1999 |
| Series | MPC8xx |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 357 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead/Silver (Sn/Pb/Ag) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MPC866 |
| JESD-30 Code | S-PBGA-B357 |
| Supply Voltage-Max (Vsup) | 1.9V |
| Power Supplies | 1.83.3V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Speed | 100MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR, RISC |
| Bit Size | 32 |
| Address Bus Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| External Data Bus Width | 32 |
| Format | FIXED POINT |
| Integrated Cache | YES |
| Voltage - I/O | 3.3V |
| Ethernet | 10Mbps (4), 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | No |
| RAM Controllers | DRAM |
| Additional Interfaces | HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART |
| Co-Processors/DSP | Communications; CPM |
| Height Seated (Max) | 2.52mm |
| Length | 25mm |
| RoHS Status | Non-RoHS Compliant |
MPC866PCZP100A Overview
With a packing size of 357-BBGA, this embedded microprocessor is ideal for international shipping. The packaging method Tray provides high reliability. Cores/Bus width of the CPU is 1 Core 32-Bit . The operating temperature around -40°C~100°C TA should be understood. The MPC8xx series contains it. DRAM RAM controllers are used by this CPU. This microprocessor is equipped with an interface of HDLC/SDLC, I2C, IrDA, PCMCIA, SPI, TDM, UART/USART. As far as I/O is concerned, this CPU runs at 3.3V. In terms of uPs and uCs as well as peripheral ICs, this is a MICROPROCESSOR, RISC. Use MPC866 to search for variants of the cpu microprocessor. As a whole, there are 357 terminations. The microprocessor should be turned on and run with a voltage supply of 1.8V volts. The architecture of the microprocessor is 32-bit. A maximum supply current of 1.9V is available. The cpu microprocessor Microprocessors is typical. There is a wide width of 32 on the external data bus of this CPU. This CPU microprocessor requires 1.83.3V power supplies according to the datasheet.
MPC866PCZP100A Features
32-Bit Structure
MPC866PCZP100A Applications
There are a lot of NXP USA Inc. MPC866PCZP100A Microprocessor applications.
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Toys
- Playstation
- Robots
- Fax machines
- Digital TVs
- Agriculture, transportation field
- Christmas lights
- Safety -airbags, automatic braking system (ABS)
- Network application field