MPC17531ATEV
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Applications | Battery Powered |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 2.7V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MPC17531 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 700mA |
| Voltage - Load | 2V~8.6V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
MPC17531ATEV Overview
Drivers controllers is designed with Tube package.The part is packaged in a 20-SSOP (0.209, 5.30mm Width) case.In general, it is recommended that the part be mounted by Surface Mount.As a result, it is appropriate for the component connected to Battery Powered.2.7V~3.6V volts can be supplied by the device.There is a temperature range of -20°C~150°C TJin which this device operates.The motor type can be classified as Brushed DC.There are 20 terminations available in the part.At a rate of [0], voltage can be applied to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 3V.Maintain a current of 700mAfor the part output.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.As a result of the MPC17531part number, it can be found.
MPC17531ATEV Features
Applications : Battery Powered
Load voltage across the chip 2V~8.6V
base on MPC17531 number
MPC17531ATEV Applications
There are a lot of NXP USA Inc. MPC17531ATEV motor drivers applications.
- Emergency lighting
- Accurate LED current matching
- LED bias
- Charge pump circuits
- Scanning equipment
- Footwell lighting
- A cross between entertainment
- Dome
- RGB and monochromatic LED drivers for signage and traffic signals
- Human-centric lighting