MP6232DN-LF
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2A (4 Weeks) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 130mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 2 |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 10 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 85m Ω |
| Length | 4.9mm |
| Width | 3.905mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MP6232DN-LF Overview
It is package in Tube case.It is included with the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package as well.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.In terms of features, the LED driving board has Status Flag.As a result, there are 8 terminations.It consists of 1 functions.Maximum output current falls to 500mA when operation criteria are met.Using a voltage of 5V allows for high efficiency.This lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 8 pins.130mOhm resistance is present in the lighting driver.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 channels to choose from.Optimal efficiency requires a voltage of 5.5V.Input voltage is limited to 5.5V volts.There is a minimum input voltage of 2.7V volts.Inputs are provided at 1.
MP6232DN-LF Features
Supplied from 5V
Resistance of 130mOhm
2 channels
MP6232DN-LF Applications
There are a lot of Monolithic Power Systems Inc. MP6232DN-LF Power Switches ICs applications.
- Hard Disk Drives
- Portable GPS
- Low Voltage I/O System Power
- Hot Swap
- Handheld Devices
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- USB Ports/Hubs
- Portable GPS Device
- Notebook PC