MM74HCT574SJX
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 481.5mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74HCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 33MHz |
| Propagation Delay | 30 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 7.2mA 7.2mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 30ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MM74HCT574SJX Overview
20-SOIC (0.209, 5.30mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. -40°C~85°C TAis the operating temperature. This D latch has the type D-Type. This type of FPGA is a part of the 74HCT series. In order for it to function properly, its output frequency should not exceed 33MHz. A total of 1elements are contained within it. Terminations are 20. It is a member of the 74HCT574 family. A voltage of 5V is used to power it. Input capacitance of this device is 10pF farads. This D flip flop belongs to the family of HCT. Surface Mount mounts this electronic component. As you can see from the design, it has pins with 20. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. This flip flop is designed with 8 Bits. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. It runs on 5Vvolts of power. The D flip flop is embedded with 2ports. Optimal efficiency requires a supply voltage of 5V. In order for the chip to function, it has 3output lines. Despite external influences, it consumes 8μAof quiescent current. Currently, there are 8 channels available.
MM74HCT574SJX Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
MM74HCT574SJX Applications
There are a lot of ON Semiconductor MM74HCT574SJX Flip Flops applications.
- Safety Clamp
- Automotive
- Computers
- Latch-up performance
- Storage registers
- Power down protection
- Latch
- QML qualified product
- Communications
- Digital electronics systems