Parameters |
Mount |
Through Hole |
Package / Case |
PDIP |
Number of Pins |
16 |
Number of Terminations |
16 |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Technology |
CMOS |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
2.54mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Number of Bits |
8 |
Propagation Delay |
30 ns |
Turn On Delay Time |
255 ns |
Family |
HC/UH |
Logic Function |
Shift Register |
Output Polarity |
TRUE |
Logic IC Type |
PARALLEL IN SERIAL OUT |
Trigger Type |
POSITIVE EDGE |
Number of Input Lines |
9 |
Count Direction |
RIGHT |
Width |
7.62mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
MM74HC597N Overview
This device can be found embedded within the package PDIP. The number of the chip's terminations sums up to 16. A voltage of 4.5V is specified for the part's operating supply. There are 1 elements on this part. 16 pins are present on the device. It is recommended that the mount should be done by Through Hole. In the HC/UH series, the electronic component belongs. 5V is noted as the operating supply voltage of this chip. 9 input lines are available on the device. A total of 8 bits are present on an IC chip. Temperatures below 85°C are recommended for use. Ideally, it should not fall below -40°C. A voltage of 6V is used to supply this voltage. Voltages higher than 2V are used for this supply.
MM74HC597N Features
With 16 pins
Operate supply voltage at 5V
MM74HC597N Applications
There are a lot of Rochester Electronics MM74HC597N Shift Registers applications.
- Serial-to-parallel data conversion
- Parallel to serial converter
- ROM Chips
- Pseudo Random Pattern Generator
- temporary data storage
- Generate time delay toward digital circuits
- 8-bit data storage
- Interconnectors
- LED matrix control
- Delay Line