MCIMX515DJM8CR2
| Parameters | |
|---|---|
| Factory Lead Time | 15 Weeks |
| Package / Case | 529-LFBGA |
| Surface Mount | YES |
| Operating Temperature | -20°C~85°C TC |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | i.MX51 |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 529 |
| ECCN Code | 5A992 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.31.00.01 |
| Subcategory | Graphics Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MCIMX515 |
| JESD-30 Code | S-PBGA-B529 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 1.15V |
| Power Supplies | 1.2V |
| Supply Voltage-Min (Vsup) | 1.05V |
| Speed | 800MHz |
| uPs/uCs/Peripheral ICs Type | MICROPROCESSOR CIRCUIT |
| Core Processor | ARM® Cortex®-A8 |
| Voltage - I/O | 1.2V 1.875V 2.775V 3.0V |
| Ethernet | 10/100Mbps (1) |
| Number of Cores/Bus Width | 1 Core 32-Bit |
| Graphics Acceleration | Yes |
| RAM Controllers | LPDDR, DDR2 |
| USB | USB 2.0 (3), USB 2.0 + PHY (1) |
| Additional Interfaces | 1-Wire, AC'97, I2C, I2S, MMC/SD, SPI, SSI, UART |
| Co-Processors/DSP | Multimedia; NEON™ SIMD |
| Security Features | ARM TZ, Boot Security, Cryptography, RTIC, Secure Fusebox, Secure JTAG, Secure Memory, Secure RTC |
| Display & Interface Controllers | Keypad, LCD |
| Height Seated (Max) | 1.6mm |
| Length | 19mm |
| RoHS Status | ROHS3 Compliant |
MCIMX515DJM8CR2 Overview
The microprocessor is convenient for international shipping since it is packaged in 529-LFBGA. The packaging method Tape & Reel (TR) provides high reliability. In the CPU, there are 1 Core 32-Bit cores and 1 Core 32-Bit bus width. Understand how the operating temperature around -20°C~85°C TC is determined. This is part of the i.MX51 series. Core-wise, this CPU has a ARM? Cortex?-A8 processor. There are LPDDR, DDR2 RAM controllers used by this CPU. Microprocessors with 1-Wire, AC'97, I2C, I2S, MMC/SD, SPI, SSI, UART interfaces are designed to serve users better. As far as I/O is concerned, this CPU runs at 1.2V 1.875V 2.775V 3.0V. A MICROPROCESSOR CIRCUIT represents the uPs/uCs/Peripheral ICs type. Use MCIMX515 when searching for variants of the embedded microprocessor. The total number of terminations is 529. With a 1.1V voltage supply, the part should be turned on and run. The supply voltage should not exceed 1.15V. As a typical Graphics Processors, this cpu microprocessor has Graphics Processors display. According to the datasheet, the embedded microprocessor requires 1.2V power supply.
MCIMX515DJM8CR2 Features
ARM? Cortex?-A8 Core
MCIMX515DJM8CR2 Applications
There are a lot of NXP USA Inc. MCIMX515DJM8CR2 Microprocessor applications.
- Accu-check
- Automatic staplers
- Network communication, mobile communication field
- Dryers
- Home appliances
- Firewalls
- Process control devices
- Home video and audio
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Industrial robot