MC74VHCT573ADT
| Parameters | |
|---|---|
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT573 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 9.5 ns |
| Turn On Delay Time | 5.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
MC74VHCT573ADT Overview
20-TSSOP (0.173, 4.40mm Width) contains it. Tube is the way it is packaged. In its configuration, Tri-State is used as the output. This electrical device has the logic type D-Type Transparent Latch. Surface Mount is used to mount this electronic part. A voltage of 4.5V~5.5V is used as the supply voltage for this device. A temperature of -40°C~85°C is used for operation. This FPGA is part of the 74VHCT series. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations. The family in which it belongs to is 74VHCT573. The device works with a voltage of 5V for its supply voltage. 20 pins are available on it. It is a member of the AHCT/VHCT family of electronic devices. It is designed with 20 pins. The electronic part is mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It belongs to the subcategory of FF/Latches. There are 5V power supplies attached to it. It contains 8 input lines where electronic circuits are present. Its reliable performance makes it an excellent choice for RAIL. For maximum efficiency, the supply voltage should be set to 5V. There are 3 output lines that correspond to the binary equivalents of the input line.
MC74VHCT573ADT Features
20-TSSOP (0.173, 4.40mm Width) package
74VHCT series
8 Bits
74VHCT573 family
20 pin count
20 pins
5V power supplies
MC74VHCT573ADT Applications
There are a lot of ON Semiconductor MC74VHCT573ADT Latches applications.
- Parallel Input
- Automotive ADAS
- BCD counting
- Double bus register system
- Four-bit storage with output enable
- Serial Output Data Queuing
- Shift left register
- Frequency dividing
- Meter applications
- Shift right register