MC74HCT374AFELG
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 30MHz |
| Propagation Delay | 31 ns |
| Turn On Delay Time | 31 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 31ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
MC74HCT374AFELG Overview
The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -55°C~125°C TAis used in the operation. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 74HCT series. In order for it to function properly, its output frequency should not exceed 30MHz. The element count is 1 . As a result, it consumes 4μA of quiescent current without being affected by external factors. There have been 20 terminations. This D latch belongs to the family of 74HCT374. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 10pF farads. HCTis the family of this D flip flop. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The part you are looking for is included in FF/Latches. An electronic part with 8bits has been designed. Its superior flexibility is attributed to its use of 8 circuits. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. The power supply is 5V. A D flip flop with 2embedded ports is available. The supply voltage should be maintained at 5V for high efficiency. The JK flip flop is with 3 output lines to operate.
MC74HCT374AFELG Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT374AFELG Applications
There are a lot of ON Semiconductor MC74HCT374AFELG Flip Flops applications.
- Latch
- Consumer
- Test & Measurement
- CMOS Process
- Data Synchronizers
- Convert a momentary switch to a toggle switch
- Asynchronous counter
- Data transfer
- Supports Live Insertion
- Shift registers