MC74HC174AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2001 |
| Series | 74HC |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 235 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC174 |
| Function | Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 7 |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 35MHz |
| Propagation Delay | 110 ns |
| Turn On Delay Time | 24 ns |
| Family | HC/UH |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Max Propagation Delay @ V, Max CL | 19ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 6 |
| fmax-Min | 24 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 20000000Hz |
| Height Seated (Max) | 4.44mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC74HC174AN Overview
16-DIP (0.300, 7.62mm)is the packaging method. D flip flop is embedded in the Tube package. Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. There is an electronic component mounted in the way of Through Hole. A voltage of 2V~6Vis used as the supply voltage. It is at -55°C~125°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. In terms of FPGAs, it belongs to the 74HC series. A frequency of 35MHzshould not be exceeded by its output. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current. The number of terminations is 16. The object belongs to the 74HC174 family. The power source is powered by 4.5V. This T flip flop has a capacitance of 10pF farads at the input. HC/UHis the family of this D flip flop. In this case, the electronic component is mounted in the way of Through Hole. A total of 16pins are provided on this board. In this device, the clock edge trigger type is Positive Edge. This part is included in FF/Latches. It is designed with 6bits. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. Its flexibility is enhanced by 7 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for RAIL. It is designed with 6 output lines.
MC74HC174AN Features
Tube package
74HC series
16 pins
6 Bits
MC74HC174AN Applications
There are a lot of ON Semiconductor MC74HC174AN Flip Flops applications.
- Automotive
- Bounce elimination switch
- Balanced 24 mA output drivers
- Single Down Count-Control Line
- Storage Registers
- Data transfer
- Digital electronics systems
- Single Up Count-Control Line
- Asynchronous counter
- Matched Rise and Fall