MC74HC112ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 26 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74HC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HC112 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 35MHz |
| Propagation Delay | 235 ns |
| Turn On Delay Time | 26 ns |
| Family | HC/UH |
| Logic Function | AND, JK-Type |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 21ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 10pF |
| Clock Edge Trigger Type | Negative Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74HC112ADR2G Overview
It is embeded in 16-SOIC (0.154, 3.90mm Width) case. You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. It is configured with a trigger that uses a value of Negative Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 2V~6V. The operating temperature is -55°C~125°C TA. This electronic flip flop is of type JK Type. In terms of FPGAs, it belongs to the 74HC series. Its output frequency should not exceed 35MHz. T flip flop consumes 4μA quiescent energy. A total of 16terminations have been recorded. Members of the 74HC112family make up this object. A voltage of 5V is used as the power supply for this D latch. A 10pFfarad input capacitance is provided by this T flip flop. It is a member of the HC/UHfamily of D flip flop. It is mounted in the way of Surface Mount. This board has 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Negative Edge. There is a base part number FF/Latchesfor the RS flip flops. As soon as Vsup reaches 6V, the maximum supply voltage is reached. Normally, the supply voltage (Vsup) should be kept above 2V. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. There are 2 channels available.
MC74HC112ADR2G Features
Tape & Reel (TR) package
74HC series
16 pins
MC74HC112ADR2G Applications
There are a lot of ON Semiconductor MC74HC112ADR2G Flip Flops applications.
- Differential Individual
- Safety Clamp
- Bus hold
- Computing
- Clock pulse
- Consumer
- Balanced 24 mA output drivers
- Bounce elimination switch
- Modulo – n – counter
- QML qualified product