MC74ACT74DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 45 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 210MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 5.5 ns |
| Family | ACT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Halogen Free | Halogen Free |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MC74ACT74DTR2G Overview
In the form of 14-TSSOP (0.173, 4.40mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. This output is configured with Differential. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74ACT series. A frequency of 210MHzshould be the maximum output frequency. T flip flop consumes 4μA quiescent energy. It has been determined that there have been 14 terminations. The 74ACT74family includes it. A voltage of 5V provides power to the D latch. Input capacitance of this device is 4.5pF farads. A device of this type belongs to the family of ACT. The electronic part is mounted in the way of Surface Mount. This board has 14 pins. It has a clock edge trigger type of Positive Edge. It is included in FF/Latches. In order to achieve its superior flexibility, 2 circuits are used. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. It runs on 5Vvolts of power. Optimal efficiency requires a supply voltage of 5V. It has 1 output lines to operate.
MC74ACT74DTR2G Features
Tape & Reel (TR) package
74ACT series
14 pins
5V power supplies
MC74ACT74DTR2G Applications
There are a lot of ON Semiconductor MC74ACT74DTR2G Flip Flops applications.
- Clock pulse
- QML qualified product
- Memory
- Event Detectors
- Balanced Propagation Delays
- High Performance Logic for test systems
- Safety Clamp
- Bus hold
- Automotive
- Count Modes