MC74ACT373NG
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Tin (Sn) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74ACT373 |
| Pin Count | 8 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 7 ns |
| Family | ACT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.024 A |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 8.5ns |
| Height Seated (Max) | 4.57mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC74ACT373NG Overview
A package called 20-DIP (0.300, 7.62mm) contains it. Packaged in the way of Tube. In its configuration, Tri-State is used as the output. This electrical device has the logic type D-Type Transparent Latch. Mounting this electronic component follows the Through Hole method. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C TA is used for operation. This FPGA is part of the 74ACT series. The design of this electronic part is based on 8 bits. This device is designed with 20 terminations. The family it belongs to is 74ACT373. With the supply voltage set at 5V, it is able to operate. 8 pins are included. ACT is the family of this electronic device. The pin configuration of the device is 20. Through Hole is used to mount this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. FF/Latches is the subcategory of this part. A total of 5V power supplies are needed to run it. An electronic circuit can be found on 8 input lines. A high efficiency supply voltage should be maintained at 5V. Input lines are converted into binary equivalents by 3 output lines.
MC74ACT373NG Features
20-DIP (0.300, 7.62mm) package
74ACT series
8 Bits
74ACT373 family
8 pin count
20 pins
5V power supplies
MC74ACT373NG Applications
There are a lot of ON Semiconductor MC74ACT373NG Latches applications.
- Automatic test equipment
- General-Purpose Register
- A/D converters
- Parallel data storage
- Counter timers
- Avionics
- Counter control
- Accumulator Registers
- Communication systems
- Serial Output Data Queuing