MC33291DW
| Parameters | |
|---|---|
| Package / Case | SOIC |
| Surface Mount | YES |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 24 |
| JESD-30 Code | R-PDSO-G24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 59/16V |
| Temperature Grade | AUTOMOTIVE |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | SPI |
| Output Configuration | Low Side |
| Driver Number of Bits | 8 |
| Fault Protection | Over Temperature, Over Voltage |
| Turn On Time | 50 μs |
| Output Peak Current Limit-Nom | 1A |
| Turn Off Time | 50 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE SINK |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC33291DW Overview
In the SOIC package you will find it.The package looks like a Bulk.This device has a total of 24 terminations.In this case, the device is located at terminal DUAL.24 pins make up the entire device.Hot-swappable device is possible to achieve high efficiency wHot-swappable deviceh a supply voltage of 5V.In Peripheral Drivers, this gadget is self-contained.For stable operation, 150°C°C is the maximum operating temperature.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.The supply voltage (Vsup) should be kept above 4.5V for normal operation.5.5V (maximum supply voltage) is set.In terms of power supplies, it is the character 59/16V that appears on the part.Hot Swap is set by default to output 8.This results in a maximum output current of 500mA, which meets the operation criteria.
MC33291DW Features
The terminal position of 24
MC33291DW Applications
There are a lot of Freescale Semiconductor, Inc. (NXP Semiconductors) MC33291DW hot swap controllers applications.
- Power supply hotswap & inrush control
- Loads
- Industrial computers and servers
- Base station power distribution system
- Base station
- Servers
- Comprehensive analog and digital capabilities
- Safe board insertion and extraction
- Limitting the inrush current
- Board or blade insertion into live backplanes