MC10E143FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Frequency | 900MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E143 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 9 |
| Propagation Delay | 1 ns |
| Turn On Delay Time | 1 ns |
| Family | 10E |
| Logic Function | Shift Register |
| Number of Inputs | 9 |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Shift Register |
| fmax-Min | 700 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E143FNR2 Overview
28-LCC (J-Lead) is the package in which the device is embedded. It sums up to 28 where the chip's terminations add up. There is a Tape & Reel (TR) case containing it. Its operating supply voltage is rated at 5V. There are 1 elements on this part. In this device, there are 28 pins. Mounting by Surface Mount is recommended. An electronic component is included in the 10E. Mounting of this component is indicated by Surface Mount. It is important to note that the operating temperature range is 0°C~85°C. There is a votage of 4.2V~5.7V provided with it. In the 10E series, this electrical component is found. By using the 10E143 family, you can find similar parts. Additional aspects of this section are as follows: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V. The minimum supply voltage (Vsup) for this part should not be less than 4.2V. Vsup cannot exceed 5.7V for this part. There are 9 bits in the IC chip. Its frequency is set to 900MHz.
MC10E143FNR2 Features
With 28 pins
Mounted in Surface Mount type.
Based on 10E143 family
MC10E143FNR2 Applications
There are a lot of ON Semiconductor MC10E143FNR2 Shift Registers applications.
- data transfer
- Pulse Extenders
- Dual-rank shift, hold, and bus applications
- Interconnectors
- Pseudo Random Pattern Generator
- Data Processors
- store data in digital form
- data manipulation
- ROM Chips
- Data Format Converters