MC10E141FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E141 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Circuits | 3 |
| Propagation Delay | 975 ps |
| Turn On Delay Time | 975 ps |
| Family | 10E |
| Logic Function | Shift Register |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Trigger Type | POSITIVE EDGE |
| fmax-Min | 700 MHz |
| Count Direction | BIDIRECTIONAL |
| Max Frequency@Nom-Sup | 700000000Hz |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E141FNR2 Overview
28-LCC (J-Lead) is the package in which the device is embedded. 28 is the sum of the number of terminations in the chip. The case Tape & Reel (TR) contains it. This part has an operating supply voltage of 5V. A total of 1 elements can be found on this part. 28 pins are located on the device. It is recommended to mount by Surface Mount. In the 10E series, the electronic component belongs. Mounting of this component is indicated by Surface Mount. 0°C~85°C is the operating temperature range. The voltage supplied to it is within the range of 4.2V~5.7V. The 10E series represents this electrical component. By using the 10E141 family, you can find similar parts. Additional aspects of this section include: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE. Ensure that Vsup is not less than 4.2V when powering this part. Voltage can be delivered at -5.2V. It should not exceed 5.7V in terms of the supply voltage (Vsup). There are 3 circuits in this device.
MC10E141FNR2 Features
With 28 pins
Mounted in Surface Mount type.
Based on 10E141 family
It supplies -5.2V power
MC10E141FNR2 Applications
There are a lot of ON Semiconductor MC10E141FNR2 Shift Registers applications.
- Pulse Extenders
- data transfer
- Interconnectors
- 8-bit data storage
- Remote control holding register
- Parallel data
- Parallel to serial converter
- Sequence generator
- Pseudo Random Pattern Generator
- temporary data storage