MC10E016FNR2
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 10E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V |
| Packing Method | TAPE AND REEL |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 10E016 |
| Pin Count | 28 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -5.2V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Bits | 8 |
| Propagation Delay | 900 ps |
| Turn On Delay Time | 900 ps |
| Reset | Asynchronous |
| Family | 10E |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Binary Counter |
| Trigger Type | Positive Edge |
| Number of Input Lines | 8 |
| fmax-Min | 700 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 700000000Hz |
| Count Rate | 900MHz |
| Timing | Synchronous |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC10E016FNR2 Overview
The device is packaged in the 28-LCC (J-Lead)type. It is configured using 28terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. In wires, 1elements are connected. In total, there are 28pins on the component. As a result, it is packaged as Tape & Reel (TR). Circuit components are connected by 28pins. The way of Surface Mount is used to mount it. The 10Efamily includes it. Having been designed as a member of the 10Eseries, it is well suited for use in a wide range of applications. The logic type of Binary Counter is adopted. Setting the operating temperature to 0°C~85°C is recommended. There is a mounting type of Surface Mounton this device. As a result, the device operates more reliably when a supply voltage of 4.2V~5.7Vis applied. The device contains information consisting of 8bits. It is important to note that NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vare really important features of this electronic device. Its base part number, [0], contains more related parts. TAPE AND REEL is employed for its packing. From the voltage source, there is -5.2Vvoltage. To operate, the device requires a voltage of [0]. There is 4.2V minimum supply voltage (Vsup) for this device. Depending on the device type, the maximum supply voltage (Vsup) can be up to 5.7V volts. A total of 8input lines are used to input binary data in the form of on/off signals.
MC10E016FNR2 Features
Embedded in the 28-LCC (J-Lead) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V
Operating supply voltage of 5V
MC10E016FNR2 Applications
There are a lot of ON Semiconductor MC10E016FNR2 Counters & Dividers applications.
- ALGEBRAIC COMPUTATION
- SQUARING
- Frequency dividers
- SQUARE ROOT
- Time delay circuits
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- Programmable binary and decade
- Fixed and programmable counters greater than 10
- Frequency division
- Control counters