MC100E241FNR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Weight | 1.182714g |
| Operating Temperature | 0°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 900GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 100E241 |
| Function | Universal |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Number of Channels | 8 |
| Number of Bits | 8 |
| Propagation Delay | 975 ps |
| Turn On Delay Time | 975 ps |
| Logic Function | Shift Register |
| Number of Inputs | 9 |
| Output Characteristics | OPEN-EMITTER |
| Halogen Free | Halogen Free |
| Logic Type | Shift Register |
| fmax-Min | 700 MHz |
| Count Direction | RIGHT |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
MC100E241FNR2G Overview
28-LCC (J-Lead) package contains the device. This chip has a total termination count of 28. There is a Tape & Reel (TR) case containing it. Parts with a 5V operating supply voltage are specified. It is a part that has 1 elements on it. 28 pins are available on the device. As a general recommendation, mounting by Surface Mount is recommended. Mounting of this component is indicated by Surface Mount. There is a temperature range of 0°C~85°C. Votage within 4.2V~5.7V is supplied. In this case, the electrical component belongs to the series 100E. If you use the 100E241 family, you can find parts that are similar. There are also the following additional considerations in this section: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE. This part must have a minimum supply voltage (Vsup) of 4.2V. Voltage can be delivered at -4.5V by the device. Ideally, the maximum supply voltage (Vsup) should not exceed 5.7V. It has a total of 8 pins. 900GHz is the frequency at which this device operates.
MC100E241FNR2G Features
With 28 pins
Mounted in Surface Mount type.
Based on 100E241 family
It supplies -4.5V power
MC100E241FNR2G Applications
There are a lot of ON Semiconductor MC100E241FNR2G Shift Registers applications.
- Counter
- Data Processors
- 8-bit data storage
- Data manipulation
- Pseudo Random Pattern Generator
- Dual-rank shift, hold, and bus applications
- ROM Chips
- data transfer
- Flash Memory
- Parallel to serial converter