MC100E241FN
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-LCC (J-Lead) |
| Number of Pins | 28 |
| Operating Temperature | 0°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| Series | 100E |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE |
| Technology | ECL |
| Voltage - Supply | 4.2V~5.7V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Frequency | 900GHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 100E241 |
| Function | Universal |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.7V |
| Power Supplies | -4.5V |
| Supply Voltage-Min (Vsup) | 4.2V |
| Propagation Delay | 975 ps |
| Turn On Delay Time | 975 ps |
| Logic Function | Shift Register |
| Number of Inputs | 9 |
| Output Characteristics | OPEN-EMITTER |
| Logic Type | Shift Register |
| Number of Bits per Element | 8 |
| fmax-Min | 700 MHz |
| Count Direction | RIGHT |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 4.57mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MC100E241FN Overview
There is a 28-LCC (J-Lead) package embedded with the device. Chip terminations add up to 28. There is a Tube case containing it. There is 5V operating supply voltage listed on the part. On this part, there are 1 elements. Devices with 28 pins are available. As a general recommendation, mounting by Surface Mount is recommended. Surface Mount is the way in which this component is mounted. The operating temperature ranges 0°C~85°C. Votage is supplied within 4.2V~5.7V. This electrical component belongs to the 100E series. By using the 100E241 family, you can find similar parts. This section has the following additional features: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V; SIPO OPERATION ALSO AVAILABLE. This part must have a minimum supply voltage (Vsup) of 4.2V. Voltage can be delivered at -4.5V by the device. Ideally, the maximum supply voltage (Vsup) should not exceed 5.7V. The device runs at 900GHz.
MC100E241FN Features
With 28 pins
Mounted in Surface Mount type.
Based on 100E241 family
It supplies -4.5V power
MC100E241FN Applications
There are a lot of ON Semiconductor MC100E241FN Shift Registers applications.
- Serial-to-parallel data conversion
- Parallel to serial converter
- data transfer
- 7-segment display control
- LED matrix control
- Data Format Converters
- Output expansion
- Delay Line
- data manipulation
- Parallel data