MAX983ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | MAX983 |
| Pin Count | 8 |
| Output Type | Open Drain |
| Number of Elements | 2 |
| Nominal Supply Current | 6μA |
| Output Current | 15μA |
| Max Supply Current | 6μA |
| Quiescent Current | 6μA |
| Response Time | 12 μs |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~11V ±1.25V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 0.015mA @ 5V |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX983ESA+ Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a Open Drain output is used here.Electronic comparator is shipped by Tube .The comparator has 8 terminals.The chip belongs to Comparators .A comparator supplied with 3V voltage can complete many demanding tasks.In terms of type, this is a typical with Voltage Reference comparator.The total number of elements is 2 .The device contains 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 8 pins on the comparator.Try search MAX983 to get more pin-to-pin solutions for your special needs.In this comparator, the quiescent current is 6μA .A Surface Mount is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 6μA for normal use.A current supply greater than 6μA may result in the comparator malfunctioning.
MAX983ESA+ Features
Open Drain output capability
with Voltage Reference IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6μA
MAX983ESA+ Applications
There are a lot of Maxim Integrated MAX983ESA+ linear comparators applications.
- High-Speed Differential Line Receiver
- Window Comparators, Multivibrators
- Mobile Communications
- Power Supervision
- Battery-Powered Electronics
- Alarm and Monitoring Circuits
- General-Purpose, Low-Voltage Applications
- Hand-Held Electronics
- Appliances
- Battery-Powered Electronics