MAX9691EPA+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 842mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX9691 |
| Pin Count | 8 |
| Output Type | Complementary, ECL |
| Number of Elements | 1 |
| Power Supplies | 5-5.2V |
| Nominal Supply Current | 26mA |
| Output Current | 50mA |
| Max Supply Current | 26mA |
| Propagation Delay | 1.8 ns |
| Quiescent Current | 26mA |
| Response Time | 2 ns |
| Common Mode Rejection Ratio | 60 dB |
| Input Offset Voltage (Vos) | 6.5mV |
| Neg Supply Voltage-Nom (Vsup) | -5.2V |
| Voltage Gain | 70dB |
| Average Bias Current-Max (IIB) | 30μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 20μA |
| Neg Supply Voltage-Max (Vsup) | -6V |
| Voltage - Input Offset (Max) | 6.5mV @ 5V |
| Current - Input Bias (Max) | 20μA @ 5V |
| CMRR, PSRR (Typ) | 80dB CMRR, 60dB PSRR |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9691EPA+ Overview
The product is packaged in 8-DIP (0.300, 7.62mm) to facilitate transportation.Output type Complementary, ECL is used for this comparator.This device is designed in Tube case.The comparator has 8 terminals.The electrical component in this case belongs to the Comparators families.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as with Latch .This is a 1 element comparator.Electronic comparator has 8 pins.A Through Hole mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.8 pins are present on the comparator.You can search MAX9691 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 26mA .Mounting on PCBs or other boards is easy with the Through Hole .Normal use of the device should require a nominal supply current of 26mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 26mA .Electronic comparator is sufficient to run the device wElectronic comparatorh 5-5.2V power supplies.Comparator electronics follows that the voltage gain of the part is 70dB .
MAX9691EPA+ Features
Complementary, ECL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 26mA
Voltage Gain: 70dB
MAX9691EPA+ Applications
There are a lot of Maxim Integrated MAX9691EPA+ linear comparators applications.
- Laptop Computers
- Portable and Battery-Powered Systems
- Set Top Boxes
- Pulse, Squarewave, and Time Delay Generators
- Point of load regulators
- Industrial
- RC Timers
- Automotive
- High-Speed Sampling Circuits
- Battery management and protection