MAX9615AXA+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TFSOP (0.049, 1.25mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Cut Tape (CT) |
| Published | 2007 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9615 |
| Pin Count | 8 |
| Output Type | Rail-to-Rail |
| Number of Channels | 2 |
| Operating Supply Current | 220μA |
| Nominal Supply Current | 220μA |
| Output Current | 75mA |
| Slew Rate | 1.3V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 82 dB |
| Current - Input Bias | 1pA |
| Voltage - Supply, Single/Dual (±) | 1.7V~5.5V |
| Output Current per Channel | 275mA |
| Input Offset Voltage (Vos) | 23μV |
| Bandwidth | 2.8MHz |
| Unity Gain BW-Nom | 2800 kHz |
| Voltage Gain | 120dB |
| Average Bias Current-Max (IIB) | 0.00000155μA |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 6V |
| Low-Bias | YES |
| Micropower | YES |
| Programmable Power | NO |
| Power | NO |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX9615AXA+T Overview
The linear amplifier is packaged in a 8-TFSOP (0.049, 1.25mm Width) case. An op amp ic of the General Purpose type. A Cut Tape (CT) case is used for delivering the op amp. There have been a total of 8 terminations over the past year. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 3.3V at all times, so please keep that in mind when using it. It should be noted that this op amp is a type of Operational Amplifier device. The op amp ic has an array of 8 pins on it. In terms of input offset voltage, operational amplifier rates 23μV. For this electronic part, it is recommended that you mount it with type Surface Mount. With regard to operating temperature, this op amp functions well at -40°C~125°C. Operational amplifier can operate supply current at 220μA. Voltage gain should remain at 120dB. The op amp ic has 2 channels on it. One of the many advantages that this linear amplifier has, among many other things, is the fact that it outputs Rail-to-Rail signals. To pack the operational amplifier ics, TAPE AND REEL is adopted as the packing method.
MAX9615AXA+T Features
8 Pins
supply voltage of 3.3V
120dB voltage gain
Output Type: Rail-to-Rail
MAX9615AXA+T Applications
There are a lot of Maxim Integrated MAX9615AXA+T Instrumentational OP Amps applications.
- Power generator
- E-book readers
- Test equipment
- Voltage regulation circuit
- Measurements of Wheatstone bridge
- Multimedia playback equipment
- Proportional operation circuits
- High input resistance broadband
- High/low-pass filter circuit
- Subtraction operation circuits