MAX941CSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch, Shutdown |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 330mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Base Part Number | MAX941 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 600μA |
| Max Supply Current | 600μA |
| Propagation Delay | 80 ns |
| Quiescent Current | 700μA |
| Response Time | 80 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.3μA |
| Supply Voltage Limit-Max | 6.5V |
| Max Input Current | 150nA |
| Input Bias Current | 300nA |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 2mV @ 5.5V |
| Current - Input Bias (Max) | 0.15μA @ 5.5V |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX941CSA+T Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Push-Pull, TTL .Electronic comparator is shipped by Tape & Reel (TR) .You can find 8 terminals of the comparator.The component belongs to the Comparators family of electrical components.With a 3V voltage supply, the comparator can perform multiple demanding tasks.The type of the chip can be classified as with Latch, Shutdown .Currently, it consists of only 1 elements.Electronic comparator has 8 pins.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .There are 8 pins on the comparator.You can search MAX941 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 700μA .The board has a Surface Mount for mounting on a PCB or any other board.Normal use of the device should require a nominal supply current of 600μA .A current supply greater than 600μA may result in the comparator malfunctioning.Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.Input current to the device cannot exceed 150nA .
MAX941CSA+T Features
CMOS, Push-Pull, TTL output capability
with Latch, Shutdown IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 700μA
MAX941CSA+T Applications
There are a lot of Maxim Integrated MAX941CSA+T linear comparators applications.
- Zero-Crossing Detectors
- Laptop Computers
- Lithium ion battery monitoring
- Mobile Communications
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Battery management and protection
- Multivibrators and High-Voltage Digital Logic Gates
- RC Timers
- Battery-Powered Electronics