MAX9119EXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 200mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9119 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 1.6μA |
| Output Current | 50mA |
| Max Supply Current | 1.6μA |
| Propagation Delay | 40 μs |
| Quiescent Current | 1.2μA |
| Common Mode Rejection Ratio | 66.02 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 1.2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 66.02dB CMRR, 80dB PSRR |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9119EXK+T Overview
In order to facilitate transportation, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .A comparator with an output type of CMOS, Push-Pull, Rail-to-Rail, TTL is being used.Electronic comparator is shipped by Tape & Reel (TR) .You can find 5 terminals of the comparator.Electronic comparator is a part of Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Electronic comparator can be classified as a General Purpose chip.The total number of elements is 1 .The device includes 5 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 5 pins on the comparator.Search MAX9119 to find more pin-to-pin solutions.There is a quiescent current of 1.2μA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires a nominal supply current of 1.6μA .A current supply greater than 1.6μA may result in the comparator malfunctioning.Electronic comparator is possible to input a maximum current of 1nA into the device.The part is based on Beyond-the-Rails? .
MAX9119EXK+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.2μA
MAX9119EXK+T Applications
There are a lot of Maxim Integrated MAX9119EXK+T linear comparators applications.
- Wireless Base Stations
- High-Speed Sampling Circuits
- Set Top Boxes
- Motor drives
- Point of load regulators
- Window Comparators, Multivibrators
- Metering Systems
- Window Comparators
- Window Comparators
- Mobile Phones