MAX903CSA+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparators |
| Max Power Dissipation | 28mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX903 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 1 |
| Nominal Supply Current | 4mA |
| Max Supply Current | 4mA |
| Propagation Delay | 8 ns |
| Quiescent Current | 1.5mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 10μA |
| Current - Quiescent (Max) | 4mA 3mA 1.5mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 82.5dB CMRR, 80dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX903CSA+T Overview
A convenient packaging is provided in the form of 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of TTL is being used.The part is shipped by Tape & Reel (TR) .There are8 terminals on the comparator.The component belongs to the Comparators family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical with Latch .Electronic comparator has a total of 1 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to 0°C~70°C in order to prevent malfunctions.Alternatively, you may search for MAX903 to find more pin-to-pin solutions for your specific needs.There is 1.5mA current flowing in this comparator.There is a Surface Mount on the board for mounting to a PCB or other board.For normal use of the device, the nominal supply current should be 4mA .If the current supply exceeds 4mA , the comparator might be damaged.The operating supply voltage for normal operation should be 9V .
MAX903CSA+T Features
TTL output capability
with Latch IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 1.5mA
MAX903CSA+T Applications
There are a lot of Maxim Integrated MAX903CSA+T linear comparators applications.
- Building automation
- Mobile Phones
- Hand-Held Electronics
- General Purpose Low Voltage Applications
- Automatic Test Equipment
- Laptop Computers
- High-Speed Sampling Circuits
- Metering Systems
- Window Comparators
- General-Purpose, Low-Voltage Applications