MAX9034ASD+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 667mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX9034 |
| Pin Count | 14 |
| Output Type | CMOS, Rail-to-Rail, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 140μA |
| Max Supply Current | 140μA |
| Propagation Delay | 228 ns |
| Quiescent Current | 55μA |
| Response Time | 20 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 2.5V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.08μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 8nA |
| Input Bias Current | 8nA |
| Current - Quiescent (Max) | 55μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.008μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 100dB CMRR, 100dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9034ASD+ Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.A comparator with an output type of CMOS, Rail-to-Rail, TTL is being used.This package has been designed with Tube .The comparator has 14 terminals.Electronic comparator is a part of Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type General Purpose .Currently, it consists of only 4 elements.Electronic comparator has 14 pins.A Surface Mount mounting type is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~125°C .There are 14 pins on the comparator.You can find more pin-to-pin solutions by searching MAX9034 .As a result, this comparator displays a quiescent current of 55μA .The board has a Surface Mount for mounting on a PCB or any other board.Normal operation of the device requires a nominal supply current of 140μA .An excess of current supply over 140μA could result in malfunction of the comparator.There is sufficient power to run the device from 3/5V power supplies.Electronic comparator is possible to input a maximum current of 8nA into the device.
MAX9034ASD+ Features
CMOS, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 55μA
MAX9034ASD+ Applications
There are a lot of Maxim Integrated MAX9034ASD+ linear comparators applications.
- Appliances
- General-Purpose Portable Devices
- Wireless Base Stations
- Motor drives
- Power management
- Analog front end
- Notebooks and PDAs
- Window Comparators
- High-Speed Sampling Circuits
- Limit Comparators