MAX902ESD+
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 6 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX902 |
| Pin Count | 14 |
| Output Type | TTL |
| Operating Supply Voltage | 9V |
| Number of Elements | 2 |
| Power Supplies | 55/10GND/-5V |
| Nominal Supply Current | 8mA |
| Max Supply Current | 8mA |
| Propagation Delay | 8 ns |
| Quiescent Current | 3mA |
| Response Time | 8 ns |
| Common Mode Rejection Ratio | 82.5 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V ±2.5V~5V |
| Input Offset Voltage (Vos) | 4mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 15μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 10μA |
| Dual Supply Voltage | 3V |
| Input Bias Current | 10μA |
| Current - Quiescent (Max) | 8mA 6mA 3mA |
| Voltage - Input Offset (Max) | 4mV @ ±5V |
| Current - Input Bias (Max) | 10μA @ ±5V |
| CMRR, PSRR (Typ) | 82.5dB CMRR, 80dB PSRR |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
MAX902ESD+ Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is TTL .This device is designed in Tube case.The comparator has a total of 14 terminals.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as with Latch .Electronic comparator consists of 2 elements in total.As a result, it contains 14 pins.Surface Mount universial mout for easy adapting.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator is equipped with 14 pins.You can find more pin-to-pin solutions by searching MAX902 .There is a quiescent current of 3mA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires a nominal supply current of 8mA .An excess of current supply over 8mA could result in malfunction of the comparator.The device can be run with 55/10GND/-5V power supplies.Electronic comparator is possible to input up to 10μA current into the device.For normal operation, the operating supply voltage must be 9V .
MAX902ESD+ Features
TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 3mA
MAX902ESD+ Applications
There are a lot of Maxim Integrated MAX902ESD+ linear comparators applications.
- Consumer Medical Electronics
- Building automation
- Infotainment and Clusters
- Lithium ion battery monitoring
- Point of load regulators
- Mobile Communications
- Pulse, Squarewave, and Time Delay Generators
- Threshold Detectors
- Automotive
- Window Comparators