MAX9015AEKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9015 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Nominal Supply Current | 1.7μA |
| Output Current | 50mA |
| Max Supply Current | 1.7μA |
| Propagation Delay | 28 μs |
| Quiescent Current | 2μA |
| Response Time | 28000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 80dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9015AEKA+T Overview
The product is packaged in SOT-23-8 in order to facilitate transportation.Output type of this comparator is CMOS, Push-Pull, Rail-to-Rail .The chip is packaged with Tape & Reel (TR) .There are8 terminals on the comparator.Other Comparator like the device play a important role in the industry.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical with Voltage Reference comparator.This element consists of 1 elements in total.A total of 8 pins are included.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching MAX9015 .The comparator presents a quiescent current of 2μA volts.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires 1.7μA supply current.If the current supply exceeds 1.7μA , the comparator could malfunction.5V power supplies are enough to run the device.You are allowed to input a maximum current of 1nA into the device.Comparator electronics comes from the series of Beyond-the-Rails? comparator parts.
MAX9015AEKA+T Features
CMOS, Push-Pull, Rail-to-Rail output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 2μA
MAX9015AEKA+T Applications
There are a lot of Maxim Integrated MAX9015AEKA+T linear comparators applications.
- Wireless Base Stations
- Mobile Phones and Tablets
- Self-diagnostics
- Battery-Powered Electronics
- Mobile Communications
- Portable and Battery-Powered Systems
- Handheld Instruments
- Window Comparators
- Window Comparators, Multivibrators
- Industrial