MAX4825ETP+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.35W |
| Technology | BICMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 8 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX4825 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | N-Channel |
| Max Output Current | 70mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3/5V |
| Supply Voltage-Min (Vsup) | 2.3V |
| Interface | Parallel |
| Nominal Supply Current | 160μA |
| Output Configuration | Low Side |
| Output Current | 70mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | Relay, Solenoid Driver |
| Rise Time | 2μs |
| Fall Time (Typ) | 2 μs |
| Ratio - Input:Output | 1:8 |
| Voltage - Load | 2.3V~5.5V |
| Driver Number of Bits | 8 |
| Turn On Time | 1 μs |
| Rds On (Typ) | 2.7 Ω |
| Turn Off Time | 3 μs |
| Built-in Protections | THERMAL |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX4825ETP+ Overview
It is package in Tube case.This file is included in package 20-WFQFN Exposed Pad.It has been mounted as Surface Mount on the LED driver.It owns the Relay, Solenoid Driver switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is N-Channel volts.It is part of the MAX4825 family of LED drivers.As a result, there are 20 terminations.20 pins are used for operation.Currently, the lighting driver has a total of 8 functions.To meet the operation criteria, the maximum output current drops to 70mA.With a supply voltage of 2.7V, high efficiency is possible.It is equipped with a total of 20 pins.When this is the case, the output current is set to 70mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage for this LED driver is 5.5V (Vsup).Normal operation requires Vsup above 2.3V.This part has a power supply of 3/5V volts.
MAX4825ETP+ Features
Supplied from 2.7V
MAX4825ETP+ Applications
There are a lot of Maxim Integrated MAX4825ETP+ Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Mobile Communication Devices
- Portable GPS
- Hot Swap
- Smart Phones, Feature Phones
- Set-Top Boxes
- Telecom and Network Systems
- PDAs
- Hot-Swap Systems
- Solid State Drivers