MAX4675EUT+T
| Parameters | |
|---|---|
| Switch-on Time-Max | 300ns |
| Normal Position | NO |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4675 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Power Supplies | +-3/+-5V |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V ±2.7V~5.5V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 250MHz |
| On-State Resistance (Max) | 3Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 85pF 85pF |
| On-state Resistance Match-Nom | 0.7Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 300ns, 110ns |
| Charge Injection | 87pC |
| Channel-to-Channel Matching (ΔRon) | 400m Ω |
| Switching | BREAK-BEFORE-MAKE |
MAX4675EUT+T Overview
Packed in SOT-23-6, the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 6. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 5V volts, the electrical part can be powered up and run. An electrical component like this is included in the 6 series. Unlike digital switches, these are based on SPST - NO switching circuits. There are 1 circuits in this switch device. Try searching for MAX4675 variants of the analog switch ic. For details about the functions of 6 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches.
MAX4675EUT+T Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 250MHz
MAX4675EUT+T Applications
There are a lot of Maxim Integrated MAX4675EUT+T Analog Switches & Multiplexers ICs applications.
- Communications systems
- Voice over IP/DSL – Integrated Access Devices, Smart
- Multi-Line E1 Interface Cards
- Cable Modem
- E1 Network Equipment
- Audio/video switches
- Relay replacements
- High reliability control systems
- Private Branch Exchange (PBX)
- Access Concentrators