MAX4610EPD
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | ALSO OPERATES AT 5V AND 12V VCC |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4610 |
| Output | SEPARATE OUTPUT |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 12V |
| Power Supplies | 3/12V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| -3db Bandwidth | 300MHz |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 16pF 16pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 65ns, 28ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -80dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 90ns |
| Voltage - Supply, Single (V+) | 2V~12V |
| Normal Position | NO |
| Length | 19.05mm |
| RoHS Status | Non-RoHS Compliant |
MAX4610EPD Overview
The electronic part can be shipped overseas conveniently because it is packaged in 14-DIP (0.300, 7.62mm). This packaging method provides high reliability because it uses advanced packaging techniques. It is mounted in the position Through Hole. 1:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -40°C~85°C TA. In total, there have been 14 terminations. A electrical component with 1 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. 14 pins are injected to the electronic part body. On the other hand, analog switches can be constructed using SPST - NO switching circuits. A 4 circuit is present in this switch device. Try searching for MAX4610 variants of the analog switch ic. This switch device is a typical Multiplexer or Switches. This analogue multiplexer requires a voltage of 2V~12V when it drains from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Don't forget the additional features of this electronic part, such as: ALSO OPERATES AT 5V AND 12V VCC.
MAX4610EPD Features
1 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 300MHz
Additional Features: ALSO OPERATES AT 5V AND 12V VCC
MAX4610EPD Applications
There are a lot of Maxim Integrated MAX4610EPD Analog Switches & Multiplexers ICs applications.
- Cellular phones
- Medical Instrumentation
- CSU
- Sample hold systems
- Transmit
- Video switching
- Optical Applications
- Microprocessor controlled systems
- Avionics test equipment
- Relay replacements