MAX4609CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX4609 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 2.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 60 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 64pF 64pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 110ns, 150ns |
| Charge Injection | 45pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -66dB @ 1MHz |
| Length | 19.175mm |
| RoHS Status | ROHS3 Compliant |
MAX4609CPE+ Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. Multiplexers like this are mounted in the Through Hole position. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operating temperature extended to 0°C~70°C TA. 16 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. Powered by a 15V voltage supply, the electrical part should be switched on and run. A total of 16 pins are injected into the body of the electronic part. Unlike digital switches, these are based on SPST - NO/NC switching circuits. This multiplexer is composed of 2 circuits. MAX4609 can be used to search for analog multiplexer variants. Multiplexer or Switches is a typical switch device. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.
MAX4609CPE+ Features
1 Channels
Switch Circuit: SPST - NO/NC
MAX4609CPE+ Applications
There are a lot of Maxim Integrated MAX4609CPE+ Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Precision test equipment
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- High-Voltage
- Microprocessor Controlled Analog Systems
- Precision instrumentation
- Switching Systems
- Video signal routing
- Cross Connects
- Sample hold systems