MAX4590EAE+
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX4590 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 1.25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 53 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 115pF 115pF |
| On-state Resistance Match-Nom | 0.05Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 160ns, 210ns |
| Charge Injection | -60pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -65dB @ 1MHz |
| Height Seated (Max) | 1.99mm |
| RoHS Status | ROHS3 Compliant |
MAX4590EAE+ Overview
As the electronic part is packed in 16-SSOP (0.209, 5.30mm Width), international shipping is convenient. High reliability is provided by advanced packaging method Tube. In Surface Mount, you'll find this switch device. Multiplexer and demultiplexer circuits have a number 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. A total of 16 terminations have been recorded. Due to its 1 channels, the electrical component produces high-quality output. Turning on and running the electrical part should be easy with a 15V voltage supply. A key feature of the 16 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SPST - NO switching circuit are built. It consists of 2 circuits. Try searching with MAX4590 if you're looking for variants. The functions of 16 pins can be found in the datasheets.
MAX4590EAE+ Features
1 Channels
Switch Circuit: SPST - NO
MAX4590EAE+ Applications
There are a lot of Maxim Integrated MAX4590EAE+ Analog Switches & Multiplexers ICs applications.
- Automatic test equipment
- RGB switches
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- HDTV
- High speed data transmission line cards
- Fiber to the Home
- Residential Gateways, Home Gateway/Router
- New designs requiring multiplexer functions
- Battery Powered Instruments
- Intelligent PBX