MAX4580EPE
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.25Ohm |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4580 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Power Supplies | 5/30/+-5/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Voltage - Supply, Single/Dual (±) | 4.5V~36V ±4.5V~20V |
| On-State Resistance (Max) | 1.25Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 115pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 160ns, 210ns |
| Charge Injection | -60pC |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -65dB @ 1MHz |
| Normal Position | NC |
| Length | 19.175mm |
| RoHS Status | Non-RoHS Compliant |
MAX4580EPE Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Through Hole. Multiplexers and demultiplexers have the same number of circuits 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 16. A 1 channel electronic part produces high-quality output. This electrical component is included in the 16 series of products. These analog multiplexers are built based on SPST - NC switching circuits. There are 2 circuits in this multiplexer. Try searching with MAX4580 if you're looking for variants. A 1.25Ohm internal resistance characterizes this multiplexer. This switch device is a typical Multiplexer or Switches. This analog switch ic utilizes SEPARATE OUTPUT output.
MAX4580EPE Features
1 Channels
Switch Circuit: SPST - NC
MAX4580EPE Applications
There are a lot of Maxim Integrated MAX4580EPE Analog Switches & Multiplexers ICs applications.
- Multi-Line E1 Interface Cards
- Mechanical reed relay replacement
- Low-Voltage
- Microwave transmission systems
- Access Concentrators
- E1 Multiplexer
- Avionics
- Avionics test equipment
- Communications systems
- Medical systems