MAX4542CPA
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| On-State Resistance (Max) | 60Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 76 dB |
| Current - Leakage (IS(off)) (Max) | 100pA |
| Channel Capacitance (CS(off), CD(off)) | 8pF 8pF |
| On-state Resistance Match-Nom | 0.8Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 100ns, 75ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 800m Ω |
| Crosstalk | -90dB @ 1MHz |
| Switch-on Time-Max | 100ns |
| Switch-off Time-Max | 75ns |
| Voltage - Supply, Single (V+) | 2.7V~12V |
| Length | 9.375mm |
| RoHS Status | Non-RoHS Compliant |
MAX4542CPA Overview
The electronic part can be shipped overseas conveniently because it is packaged in 8-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. It is mounted in the position Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around 0°C~70°C TA. There are 8 terminations totally. This electronic part offers high-quality output due to its 1 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. An injection of 8 pins is performed into the body of the electrical component. Multiplexers built on a SPST - NC switching circuit are built. A 2 circuit is present in this switch device. This analogue multiplexer requires a voltage of 2.7V~12V when it drains from a single voltage supply.
MAX4542CPA Features
1 Channels
Switch Circuit: SPST - NC
MAX4542CPA Applications
There are a lot of Rochester Electronics, LLC MAX4542CPA Analog Switches & Multiplexers ICs applications.
- New designs requiring multiplexer functions
- PDH Multiplexers
- High speed data transmission line cards
- Medical Instrumentation
- Communications systems
- Fault Tolerant Systems
- Imaging
- Audio signal routing
- Audio and video switching
- Power routing