MAX4533EPP
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | CAN ALSO OPERATE AT 12V NOMINAL |
| Subcategory | Multiplexer or Switches |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | MAX4533 |
| Output | SEPARATE OUTPUT |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Power Supplies | 12/+-15V |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Voltage - Supply, Single/Dual (±) | 9V~36V ±4.5V~18V |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| On-State Resistance (Max) | 175Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 62 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 6Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 250ns, 150ns |
| Charge Injection | 1.5pC |
| Channel-to-Channel Matching (ΔRon) | 1 Ω |
| Crosstalk | -66dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 250ns |
| Switch-off Time-Max | 150ns |
| Length | 26.16mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX4533EPP Overview
Shipping overseas is convenient with the electronic component packed in 20-DIP (0.300, 7.62mm). Advanced packaging method Tube is used to provide high reliability. In Through Hole, this analog switch is mounted. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -40°C~85°C TA extended. Total terminations are 20. A high-quality output is provided by the electrical component's 1 channels. When the electronic component is given a voltage of 15V, it should be turned on and run. A total of 20 pins are injected into the electrical part body. These analog multiplexers are built based on SPDT switching circuits. A 4 circuit is present in this switch device. Search with MAX4533 if you are looking for analog multiplexer variants. This switch device is a typical Multiplexer or Switches. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. Don't forget the additional features of this electronic part, such as: CAN ALSO OPERATE AT 12V NOMINAL.
MAX4533EPP Features
1 Channels
Switch Circuit: SPDT
Additional Features: CAN ALSO OPERATE AT 12V NOMINAL
MAX4533EPP Applications
There are a lot of Maxim Integrated MAX4533EPP Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Video signal routing
- PBXs
- Microwave transmission systems
- Remote Powered Equipment
- Relay Replacement
- RGB switches
- Relay replacements
- Imaging
- Channelized and Unchannelized DS3 applications