MAX382CPN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 18-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1995 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 100Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 889mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX382 |
| Pin Count | 18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 12V |
| Power Supplies | 3/5/+-5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 1μA |
| Propagation Delay | 275 ns |
| Turn On Delay Time | 500 ns |
| Voltage - Supply, Single/Dual (±) | 2.7V~16.5V ±3V~8V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 400 ns |
| On-State Resistance (Max) | 100Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 200pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 40pF |
| On-state Resistance Match-Nom | 4Ohm |
| Switch Time (Ton, Toff) (Max) | 150ns, 150ns |
| Charge Injection | 2pC |
| Channel-to-Channel Matching (ΔRon) | 4 Ω (Max) |
| Crosstalk | -92dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Signal Current-Max | 0.03A |
| Height Seated (Max) | 4.572mm |
| Length | 22.86mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
MAX382CPN Overview
This electronic part is conveniently packaged in 18-DIP (0.300, 7.62mm), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. There is an analog multiplexer mounted in position Through Hole. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around 0°C~70°C TA. In total, 18 terminations have occurred. The electronic part provides high-quality output because it has 8 channels. An 5V voltage supply should allow the electrical part to be turned on and run. This electrical component is included in the 18 series of products. It consists of 1 circuits. Try searching with MAX382 if you're looking for variants. The internal resistance of this digital multiplexer is 100Ohm. Theswitch device is a typical Multiplexer or Switches. The switch device would be able to operate with 1μA current. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. Operating voltages of 12V are compatible with the electrical part.
MAX382CPN Features
8 Channels
1μA Supply Current
MAX382CPN Applications
There are a lot of Maxim Integrated MAX382CPN Analog Switches & Multiplexers ICs applications.
- Battery Powered Instruments
- SONET/SDH ADM
- Medical Instrumentation
- Medical
- Digital cross connects (DSX-1)
- MP3 players
- Audio signal routing
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Fiber to the Home
- Cell phones