M74HC595B1R
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -55°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Supply Voltage | 4.5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | M74HC59 |
| Function | Serial to Parallel, Serial |
| Output Type | Tri-State |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Power Dissipation | 750mW |
| Number of Bits | 8 |
| Propagation Delay | 285 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 285 ns |
| Family | HC/UH |
| Logic Function | Shift Register |
| Direction | Unidirectional |
| Logic Type | Shift Register |
| Output Polarity | TRUE |
| Trigger Type | POSITIVE EDGE |
| Number of Output Lines | 3 |
| fmax-Min | 24 MHz |
| Max Frequency@Nom-Sup | 24000000Hz |
| Height | 4.59mm |
| Length | 20mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
M74HC595B1R Overview
In package 16-DIP (0.300, 7.62mm), there is an embedded device. Chip terminations add up to 16. It is packed in a case number Tube. 4.5V is the part's operating supply voltage. This part has 1 elements. The device is equipped with 16 pins. The recommended mounting method is Through Hole. In this case, the electronic component belongs to the HC/UH. Through Hole is the way in which this component is mounted. There is a range of operating temperatures -55°C~125°C. Votage is provided within 2V~6V. This electrical component belongs to the 74HC series. By using the M74HC59 family, you can find similar parts. There are also the following additional considerations in this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. There should be no voltage less than 2V at the minimum supply voltage (Vsup). There is a possibility of delivering voltage at 2/6V. Vsup cannot exceed 6V for this part. There are 8 bits on the IC chip. There are 3 output lines to operate. As a result, it runs at a quiescent current of 4μA. This device contains 8 circuits.
M74HC595B1R Features
With 16 pins
Mounted in Through Hole type.
Based on M74HC59 family
It supplies 2/6V power
With 3 output lines
Quiescent Current at 4μA
M74HC595B1R Applications
There are a lot of STMicroelectronics M74HC595B1R Shift Registers applications.
- Flash Memory
- Data manipulation
- Remote control holding register
- 7-segment display control
- Pulse Extenders
- Serial to parallel converter
- Serial-to-parallel data conversion
- Sequence generator
- 8-bit data storage
- Pattern Recognizers