M4A5-256/128-10YI
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-BFQFP |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | M4A5-256 |
| Pin Count | 208 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 128 |
| Memory Type | EEPROM |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 10 ns |
| Number of Gates | 10000 |
| Max Frequency | 100MHz |
| Number of Programmable I/O | 900 |
| Output Function | MACROCELL |
| Number of Macro Cells | 256 |
| JTAG BST | YES |
| Number of Dedicated Inputs | 14 |
| Voltage Supply - Internal | 4.5V~5.5V |
| Height Seated (Max) | 4.1mm |
| Length | 28mm |
| Width | 28mm |
| RoHS Status | Non-RoHS Compliant |
M4A5-256/128-10YI Overview
There are 256 macro cells, which are cells in a mobile phone network that provides radio coverage served by a high-power cell site (tower, antenna or mast).It is embedded in the 208-BFQFP package.It is programmed with 128 I/Os.208terminations have been programmed into the device.This electrical part is wired with a terminal position of QUAD.Power is supplied by a voltage of 5V volts.The part is included in Programmable Logic Devices.Trayshould be used for packaging the chip.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.Chips should be mounted by Surface Mount.As part of the ispMACH? 4Aseries, it is a type of FPGA.Chips are programmed with 208 pins.Additionally, this device is capable of displaying [0].The M4A5-256indicates that its related parts can be found.10000gates are devices that serve as building blocks for digital circuits.In order to maintain high efficiency, the supply voltage should be maintained at [0].EEPROM is adopted for storing data.It is mounted by Surface Mount.There are 208pins on it.This device operates at a voltage of 5.5V when the maximum supply voltage is applied.It operates with the minimal supply voltage of 4.5V.The system runs on a power supply of 5V watts.A total of 900programmable I/Os are available.It is recommended that the maximal frequency be lower than 100MHz.The status of input signals is detected by 14dedicated inputs.
M4A5-256/128-10YI Features
208-BFQFP package
128 I/Os
The operating temperature of -40°C~85°C TA
208 pin count
208 pins
5V power supplies
M4A5-256/128-10YI Applications
There are a lot of Lattice Semiconductor Corporation M4A5-256/128-10YI CPLDs applications.
- DMA control
- Multiple DIP Switch Replacement
- SUPERVISORY FUNCTION (LVD AND WATCHDOG)
- Digital designs
- Software-Driven Hardware Configuration
- Programmable power management
- State machine control
- I/O PORTS (MCU MODULE)
- Voltage level translation
- Bootloaders for FPGAs