M4A3-384/192-12FANI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-BGA |
| Number of Pins | 256 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 1998 |
| Series | ispMACH® 4A |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | YES |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | M4A3-384 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Programmable Type | In System Programmable |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Number of I/O | 192 |
| Memory Type | EEPROM |
| Propagation Delay | 12 ns |
| Number of Gates | 15000 |
| Max Frequency | 83.3MHz |
| Number of Programmable I/O | 145 |
| Output Function | MACROCELL |
| Number of Macro Cells | 384 |
| JTAG BST | YES |
| Voltage Supply - Internal | 3V~3.6V |
| Height Seated (Max) | 2.1mm |
| Length | 17mm |
| Width | 17mm |
| RoHS Status | ROHS3 Compliant |
M4A3-384/192-12FANI Overview
There are 384 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.The item is enclosed in a 256-BGA package.In this case, there are 192 I/Os programmed.It is programmed to terminate devices at [0].The terminal position of this electrical component is BOTTOM.Power is provided by a supply voltage of 3.3V volts.It is a part of family [0].Trayshould be used to package the chip.During operation, the operating temperature is kept at -40°C~85°C TA to ensure its reliability.There should be a Surface Mounton the chip.In terms of FPGAs, it belongs to the ispMACH? 4A series.It is programmed with 256 pins.If this device is used, you will also be able to find [0].The M4A3-384can be used to identify its related parts.In digital circuits, 15000gates serve as building blocks.High efficiency requires the supply voltage to be maintained at [0].Data storage is performed using [0].In this case, it is mounted by Surface Mount.A total of 256pins are provided on this board.There is a maximum supply voltage of 3.6Vwhen the device is operating.A minimum supply voltage of 3V is required for it to operate.A total of 145 Programmable I/Os are available.The maximum frequency should not exceed 83.3MHz.
M4A3-384/192-12FANI Features
256-BGA package
192 I/Os
The operating temperature of -40°C~85°C TA
256 pin count
256 pins
M4A3-384/192-12FANI Applications
There are a lot of Lattice Semiconductor Corporation M4A3-384/192-12FANI CPLDs applications.
- Complex programmable logic devices
- Bootloaders for FPGAs
- D/T registers and latches
- Software-Driven Hardware Configuration
- PULSE WIDTH MODULATION (PWM)
- POWER-SAVING MODES
- Multiple DIP Switch Replacement
- STANDARD SERIAL INTERFACE UART
- Page register
- Synchronous or asynchronous mode