LTC3865IUH#TRPBF
| Parameters | |
|---|---|
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3865 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Control Features | Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 250kHz~770kHz |
| Input Voltage (Max) | 38V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 880kHz |
| Duty Cycle (Max) | 95% |
| Clock Sync | No |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
LTC3865IUH#TRPBF Overview
Capsuled in the 32-WFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of handling Transistor Driver dc switching's outputs (s). 4.5V~38V is the operating voltage and supply voltage of the dc control. Worked in a -40°C~125°C TJ dc switcher before. There is a switch at 250kHz~770kHz that can be used with this controller. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. The switching converters's terminal (s) are designed at QUAD . A variety of dc switching's functions can be performed on 32 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's voltage input of 15V. LTC3865 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 32 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4.5V. DC regulator outputs 5V voltage based on test statistics. It should be fully noted that the dc to dc regulator only accepts 38V input voltage at most. This dc regulatorhas a max frequency of 880kHz. DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V to better satisfy the need.
LTC3865IUH#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 250kHz~770kHz
Current Limit, Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 5V
LTC3865IUH#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3865IUH#TRPBF DC to DC converter applications.
- Laboratories
- Access control systems
- Bending machines
- PSRR circuits
- Planers
- Computer-related products
- Machining centers
- Thermal power
- Flaw detection equipment
- Medical equipment